粘度指数改进剂RHY-615

viscosity index improver: rhy-615

the viscosity index improver rhy-614 of hong kong’s aowaseda pertrochemical co.,ltd is produced from the good and special quality imported dual ethylene-propylene rubber as raw materials, hot melted in 150sn with certain proportion. the product has excellent shear stability ,good thickening ability,thermal stability and low temperature performance,is suitable for various viscosity level of sj, cf - 4 above level of high-grade multistage engine oil, especially suitable for heavy duty diesel oil,the quality of products meet the petrochina lubricating oil company rhy-615 product standards.

physical and chemical properties

item uint test method targets typical data

appearanc yellowish or yellow transparent sticky liquid

color class gb/t6540≯2.0 1.5

movement viscosity of 100℃mm2/s gb/t265≮550 612

thickening capacity mm2/s sh/t0566≮4.2 4.2

diesel nozzle shear stability indexssi％ q/sy rh4001 ≯20 19.54

floc point（open）℃gb/t3536≮170 190

ppd parameter℃sh/t0622-07 appendix d report 18

moisture m％ gb/t260≯0.06traces

mechanical impurities m％ gb/t511≯0.08 0.047

low apparent viscosity（-20℃ccs） mpa.s q/sy rh3001-02 appendix b report 2950

notes

when this product adjust multistage engine oil, the maximum temperature should not exceed 80℃, if long-term storage of the product, the temperature should not exceed 50℃, product barrel weight 170kgs.

manufacturer:

hong kong aowaseda petrochemical co.,ltd

guangdong representative office: no.20 dongsheng road, jiangmen city, guangdong province, china.

contacts: mr.li guofei

mob: 86

tel：86 750-3807990

fax：86 750-3809993

粘度指数改进剂： rhy-615

香港奥莱斯特石化有限公司生产的粘度指数改进剂rhy-615,是采用进口的专用优质二元乙丙胶为原料,以一定比例热熔于150sn中而制成。产品具有优良的剪切稳定性，良好的增稠能力、热稳定性及低温性能，适用于调制各种粘度等级的sj、cf-4以上级别的高档多级内燃机油，尤其适用于重负荷柴油机油，产品质量满足中国石油润滑油公司rhy-615产品指标。

理化性质

项目单位 测试方法 指标 典型数据

外观 目测浅黄色或黄色透明粘稠液体

颜色 级 gb/t6540 ≯2.0 1.5

运动粘度100℃ mm2/s gb/t265 ≮550 612　

稠化能力 mm2/s q/sy rh4001 ≮4.2 4.2

柴油喷嘴剪切稳定性指数ssi ％　　 q/sy rh3001附录a ≯20 19.54

闪点（开口）， ℃ gb/t3536 ≮170 190

降凝度参数， ℃ sh/t0622-07附录d 报告 18

水分 m％ gb/t260 ≯0.06 痕迹

机械杂质 m％ gb/t511 ≯0.08 0.047

低温表观粘度（-20℃ccs）mpa.s q/sy rh3001-02附录b 报告 2950

注意事项

使用该产品调制多级内燃机油时，温度Zui高不应超过80℃；若长期储存该产品时，温度不应超过50℃。产品每桶净重170kg。

生产厂家

香港奥莱斯特（aowaseda）石化有限公司

中国广东办事处地址：中国广东省江门市江海区东升路20号

联系人：黎国飞

手机：86

电话：86 750-3807990

传真：86 750-3809993