HBL2723 INSULGRIP TWIST LOCK 30A 3 PHASE 250VAC

8500/8510 电源接头

leviton 2723 locking connector. industrial specification grade, nema l15-30r, 3-pole, 4-wire, grounding, rated 30a 250v 3-phase. cord grip range: .595"-1.150". terminals accommodate #18-#10 awg. leviton"s industrial grade locking plugs, connectors, and receptacles are definitely a step above the rest in each is individually packaged; packaging may differ from photo. features include:

one-piece, rivetless, .035" thick brass contacts offer enlarged contact surface area, low heat, and long life

cleat on contacts cuts oxidation when plug blade enter contact surface

internal wiring chambers isolate individual conductors to prevent flashover, arcing, and stray strands of wire

deep-funnelled, large rectangular-shaped chamfered wire wells guide conductors into termination position

transparent wiring chambers provide a means of visual inspection of conductors and terminals

wire clamps move within individual chambers to provide positive crimp lock without cutting wire strands

color-coded terminal screws

molded-in strip gage provides correct measurement for proper strip length of conductor

captive terminal screws eliminate nuisance dropping and searching for missing screws

positive crimp contact plate bundles stranded wire maximizing wire/clamp surface contact

combination #10-32 deep slotted/ phillips brass screws easily torque to 10-14 in.-lbs.

super tough nylon body resists damage from severe impact, abrasion, and chemical attack

wiring module keyed to body for easy assembly. deep slotted/phillips steel screws secure wiring module (12-14 in.-lbs.) to body

ergonomically designed fluted body with radial gripping ridge creates an ideal surface for gripping, turning, and pulling

nema configuration, agency certifications, and device rating are molded on front of device to assist with identification

external cord clamp utilizes deep slotted/phillips steel screws that are backed out and positioned inside shrouded pockets to prevent slippage of screwdriver blade when tightening cord clamp screws

external clamp accepts wire mesh grips. strain relief insert is easily removed without removing cord clamp to accommodate larger cords. cable gage identifies maximum cord size allowed with strain relief insert