functions
tape feed and cutting speed are 1.5 times faster than the existing
products.
a cabinet-type without tape hanger, which enables the use of any
type of the tape reel.
one-touch exchangeable knife set makes it possible change the blade
at outside by anyone.
lubricant is automatically applied to the knife edge.
self-diagnosis displays error and generates a buzz on
emergency.
built-in tweezers for cutting short tapes.
non-adhesive product can be used.
quantity counter function helps cut shortage tubes, labels, ribbon,
etc.
by adjusting the quantity and the length.
-- specification --
◎ display : 4 digit led
◎ width : 5~50㎜
◎ length : 5㎜ ~ 999㎜
◎ tape transfer roller :dc motor
◎ power source : ac 100/200v 50/60hz ,25w
◎ size : 115㎜×215㎜×130㎜
◎ weight : 3.0㎏
control
panel
① set a : adjust the tape length(cm)
② set b : adjust the tape length(mm)
- change the operating mode in p or l
- p : auto,manual
- l : continuous operation
③ select : set the tape length & cut piece figure,operate p,l
mode
④ fwd(forward): feed the tape toward
⑥ start : feed tape and cuts automatically or manually
⑥ rev(reverse) : rewind the tape away from cut area
⑦ lamp : displays in the auto mode
⑧ auto/manual : change the operating mode in auto or manual
⑨ led : displays the length of the tape, keeping on operating
mode.