KD-06聚四氟乙烯拉丝机

本机组采用：

1，plc集中控制，操作方便。

2，温控精度高，2度之内，巡回检测，动态显示。

3，加热箱采用封闭式，从室温到设定温度加热时间短，保温效果好，大幅度节能，避免工作环境大幅温升。、

4，卷绕采用恒张力卷曲，确保成型和退绕。

5，牵伸范围1-9倍

6，温度范围室温-400℃。

7，牵伸后纤维细度可达200d.

适合对聚氟四乙烯单丝或合股丝，尼龙长丝等塑料丝进行牵伸，达到理想细度。

1, plc centralized control, easy to operate.

2, temperature high precision, within 2 degrees, touring inspection, dynamic display.

3, heating box adopts closed from room temperature to set temperature, heating time is short, heat preservation effect is good, further energy-saving, avoid working environment temperature rise sharply. ,

4, winding adopts constant tension curly, ensure molding and retreat around.

5, drafting range 1-9 times

6, temperature range 0℃ - - 400.℃

7, draft after fiber fineness can reach 200d.

suitable for poly fluorine ethylene monofiber four or partners silk, nylon filament plastic wire for drafting, to achieve the ideal fineness.