口罩机、鸭嘴口罩机、纱布口罩机、立体口罩机 无纺布口罩机
信息编号:1391694 浏览:62次- 供应商
- 张家港市阿莱特机械有限公司 商铺
- 认证
- 报价
- 人民币¥55000.00元每台
- 种类
- 花边机
- 用途
- 缝纫设备
- 自动化程度
- 全自动
- 所在地
- 中国 江苏 张家港市 江苏省张家港市塘桥镇鹿苑牛桥工业区
- 联系电话
- 86 0512 58356801
- 手机号
- 13862239760
- 让卖家联系我
产品详细介绍
种类 | 花边机 | 用途 | 缝纫设备 |
自动化程度 | 全自动 | 适用厚度范围 | 无纺布制品 |
线迹类型 | 绗缝机 | 品牌 | 阿莱特 |
型号 | ALT-175 165 145 125 120 | 适用场所 | 服务性行业用 |
作用对象 | 无纺布制品 | 驱动形式 | 电动 |
针数 | 机器打片 | 线数 | 几层无纺布 |
机头数 | 单头机 | 产品类型 | 全新 |
外形尺寸(长*宽*高) | 2000*600*1200(mm) | 整机重量 | 500(Kg) |
产品别名 | 无纺布口罩机 |
口罩机图片
二:口罩
三:机器中文资料
型号:alt-175
功率:3.5kw
产品单价:75000元/台
工作周期:20
详细说明:全铝型材机体,触摸屏式控制,噪音低,焊接性能优越,高速打片,每分钟Zui高速度可制片200枚.
四:机器英文资料
catalogue
1. performance characteristic
2. technical parameter
3. technical processdespription
4. operating programe
5. maintenance
6. attentions
7.spare part
disposable non-woven mask production
1.performance characteristic
we adopt the international advanced technology for this machine , the al bar transported by feed cam , the length of the al bar can be adjust freely . it also can be added double al bars if necessary . and the machine is low power consumption and much lighter .
2.technical parameter:
2.1 supply power: ac380v or 220v 50hz
2.2 power : 3.5kw
2.3 designed speed : 200pcs/minute
2.4 optimum speed : 100 -160pcs/minute
2.5 dimensions : main machine (mask machine):2000*600*1200mm
feeding framework : 1600*550*1400mm
conveyor belt : 1770*330*900mm
2.6 net weight:800kg
3. process despription
outer layer non woven fabric feeding |
middle layer filter feeding |
inner layer non woven fabric feeding |
edge folding |
ultrasonic welding |
reshaping |
both ends ultrasonic welding |
albar feeding |
cutting |
transporting |
4. operating program
4.1 place the non-woven farbics ,al bar(2.8-3mm/w) ,meltblown on the feeding framework ,
4.2 adjust the hand wheel to make the centers in a same line.
4.3 open the main machine and ultrasonic welding e
4.4 check the position of the edge folding pressure plate
4.5 adjust the position of the al bar .
4.6 check the position of the reshape roller , to be sure the 3 folding in the center of the mask .
4.7 adjust the welding pressure to be sure welding fastness .
4.8 adjust the position of the blade to be sure the mask cutting accuratly. adjust the blade to be higher 0.5-0.7mm than the roller surface .
5. maintenance
5.1 scheduled check the main parts ,such as the axletree bearings ,ensure all the bearing lubricating enough.
5.2 scheduled check the welding head mechanical wearing conditions , adjust the pressure to a suitable state , try to adjust the pressure to be minimum at the station of welding well .
5.3 often check the tensile force of the raw material coils ,ensure all the materials running in step & the surface with no laxation.
5.4 please adjust the pressure of the cutting blade to avoid blading damage.
6. attentions
6.1 please start the ultrasonic welding e before open the main machine to avoid the superimposed load damage the ultrasonic e.
6.2 please pull all the raw material sheet to the welding mould .
6.3 adjust the pressure (such as welding mould , cutting blade ) to be suitable ,try to reduce the loading.
6.4 scheduled check all the bearings running well & lubricating well.
6.5 don’t stop the machine at a high speed , please adjust the production speed at 20pcs/minute before you close the switch .
7.spare part
cutting blade:4set
nose bar cutting blade: 4sets
steel wire:20 pcs
rubber roller:4 sets
wrench:1 set
五:
质量保证与售后服务:
一.质量保证任务范围
公司在工程上的设计.生产.调试和服务均在质量体系的模式下进行。以本公司的工程实力和多年的工程经验,并通过iso9001质量体系论证,ce认证,我们保证贵公司购买的机器设备及服务以Zui优的质量要求和管理而进行实施。
二.质量保证执行范围:
1.公司领导全面参与.建立,实施,并不断完善一个灵活有效的质量体系;
2.对人员进行充分的培训和发展;
3.预防和改进相结合对产品的开发设计.生产.销售.服务等全过程进行质量控制;
4.不断完善产品技术,开发高新技术产品,将质量保证延伸至产品Zui后环节;
5.保证按计划和程序实施,并在实施过程中进行连续评价和验证。
三.质量合格证管理方法:
在产品开发研制.采购.生产过程.核对和测试.安装与运行.技术服务和维护六个方面严格按照质量检测保证实施。
a.产品设计.开发控制
硬件开发工作包括可行性分析.总体设计.详细设计.实验.调试小批量生产.生产技术规范.技术档案总结与后续开发计划等十个方面;
软件系统开发包括可行性分析.总体设计.详细设计.系统分析.系统设计.编程.测试商品.技术总结与后续开发计划等九项工作;
产品开发档案管理和保密工作由公司总工全面负责,并负责收集上交公司;
开发档案包括阶段工作档案与技术成果档案;
产品开发的每一个阶段都应组织会议评审,并由行政部保存评审记录。
b.采购控制
1.根据供货商的业绩及其已证实的质量保证能力的记录来选择供货商,确保其能够提供满足合同要求的产品或任务;
2.当需方或其它代表需要在公司的供应厂家进行检验时,公司专人负责配合需方的查验工作,确保满足需方的质量要求。
c.顾客财产的控制
按照合约协议要求,对顾客供其使用或纳入产品的顾客财产,进行标识.验证.保护和维护,以保证顾客的产品符合规定的要求,并得到正确的使用方法。
d.生产程控
1.生产过程都应在受控状态下进行,当生产质量出现异常时,须及时进行分析并制订有效的改进措施;
2.控制来料的质量,并要求供货商提供以证实来料质量的文件。
e.检验、测试控制
1.公司质验部门负责审批检验规程,确保各类物料或产品均通过要求的检验和测试;
2.定期对设备和计量器具进行检查;
3.成品包装完毕后,质检人员按检验标准和检验计划进行成品Zui终检验和测试,检验合格后的产品方可入库和销售;
f.施工安装控制
1.公司具有一支强大的售后安装人员队伍;
2.具有可靠和完善的施工器材和交通工具;
3.制订一套科学而严格的安装检验和检验管理制度。
g.技术服务和维护控制
1.公司合格证按照合同的要求,向客户提供良好的技术咨询.配件和维护服务,并保存有完整的记录以及客户跟踪;
2.用户投放或在进行中出现质量问题由售后服务人员回馈到有关部门,及时采取纠正措施;
3.当合同有特殊要求时,按合同等有关规定提供售后服务,Zui大限度的满足客户的要求。
四、售后服务承诺:
1.设备出售后,整机壹年内免费维修,终身提供售后服务(耗材除外)。
2.设备出现质量问题,我司将在24小时内上门服务(国内)。
3、长期进行免费技术咨询及提供模具制作方案
- 超声波发生器 超声波焊接机 点焊机3,500.00元/台
类型:一体式 - 口罩橡筋带点焊机、无纺布耳带点焊机 点焊机 口罩点焊机3,000.00元/台
频段:中频 - 【强烈推荐】立体口罩机 超级无纺布口罩机 E形口罩机品牌:阿莱特
- 口罩耳带机、无纺布口罩耳带机、口罩橡筋耳带机 点焊机品牌:阿莱特
- 条形帽子机 一次性帽子机 厨师帽子机 帽子机 医生帽机品牌:阿莱特
- 口罩上带机、无纺布口罩上带机、口罩包边机 包边机 绑带机品牌:ALT-上带机包边机
- 无纺布分切机 卫生纸分切机 纱布分切机 PE分切机最大原料宽度:1400(mm)