SGZ1250型三足式下部卸料/下卸料 全自动刮刀卸料离心机

sgz/sg三足式刮刀下部卸料自动离心机

sgz/sg three-column scraper bottom discharging automatic centrifuge

■主要特点features

1、采用plc控制，程序设定，无人看护的自动化操作，加料、初过滤、洗涤、精过滤、卸料全过程监护。

2、变频调速，启动平稳，分离因数可调。

3、能耗制动，非接触式制动方式，无磨擦粉尘污染。

4、密闭结构，密封件采用硅橡胶或氟橡胶，离心机内腔氮气保护，可实现密闭防爆要求。

5、结构设计合理，在线清洗系统，保证了洁净度要求，符合gmp规范。

6、机电式料程控制。

7、安全保护：转速检测，过振动保护，电机过载过热保护，刮刀旋转、升降机械电气双重控制，刮刀与转鼓的联动锁定。

1、plc based control with programmable setup automatic operation with no operator attention monitors the whole process including feeding first cycle filtration, cleaning. intensive filtration and discharging.

2、frequency converter for speed regulation makes start smooth separation factor is adjustable.

3、dynamic braking non-touching braking doesn’t produce dusts.

4、leak-proof structure with silicone rubber or fluoroelastomers seats it is of anti-explosion with nitrogen protecting the machine inside.

5、reasonable design of structure with automatic online cleaning system ensures meeting clean re in accordance with gmp standards.

6、prog rammed electromechanical feeding control.

7、safety protection: rotation rate detection. vibration protection, motor overload and overheat protection, dual control with both electrical and mechanical to scrapers and the lifting device. interlocking the scraper and rum.

标准配置standard manufacturing form

1、结构：外壳配置翻盖及进料管、洗涤管、观察镜、排气口、照明孔；密闭结构，转鼓及外壳、翻盖等部件为不锈钢材料(sus304)制造。机座等为铸造件，表面包衬不锈钢。转鼓、外壳内外表面、机器外露件表面均抛光处理。

2、采用plc控制。

3、传动与制动：普通电机（或防爆电机）＋变频器＋能耗制动。

4、液压动作系统。

1、struclure: feeding pipe, washing pipe. observation window exhaust hole. inspection & repair hole lightening hole have been applied in the turning over cover of the outshell the sealing structure. rotating drum and outshell. turning over cover are all made of stainless steel(sus304). machine chassis parts are made of cast material, the surface is covered with stainless steel the rotating drum. inside and outside surfaces of the outshell. the exposed parts of the machine have all been polish treated.

2、plc control is applied.

3、transmission and brake: normal motor(or explosion prevention motor)+frequency modulator’ power consumption brake.

4、hydraulic operation system.

■选装配置device for choice

1、氮气保护系统。

2、触摸屏控制。

3、减速箱传动（低速由小电机拖动）。

1、nitrogen protection system.

2、touch screen control.

3、drive of deceleration box (low speed is driven by small motor).

■客户成功运用案例