HP B180L工作站

                                      HP B180L工作站

整机参数

HP B180L HP Visualize b180L：180MHZ/256MB/9GB

A4190-66528 HP B180L MOTHERBOARD

0950-3021 HP B180L 200W POWEWR SUPPLY 

A4200-66545 HP B CLASS 100MHZ 512KB CACHE MEMORY

A3830-60001 HP 128MB ECC MEMORY MODULE HP B132L B180L

A4190-66523 HP B Class B180 5 Volt Backplane Board With Eisa 

82350-66501 HP agilent E2078A 82350A PCI-GPIB卡

E1489-66511 HP E1489-66511 PCA MXI CONTROLLER   

备件详情

CPU

   B132L: PA-7300LC 132 MHz with 64/64 KB int. L1 (+ 1 MB ext. L2)

   B132L+: PA-7300LC 132 MHz with 64/64 KB int. L1 (+ 1 MB ext. L2)

   B160L: PA-7300LC 160 MHz with 64/64 KB int. L1 (+ 1 MB ext. L2)

   B180L+: PA-7300LC 180 MHz with 64/64 KB int. L1 (+ 1 MB ext. L2)

Chipset

  LASI ASIC, which features:

  NCR 53C710 8-bit single-ended SCSI-2

  Intel 82596CA 10 Mbit Ethernet controller

  WD 16C522 compatible parallel

  Harmony CD/DAT 16-bit stereo audio

  NS 16550A compatible serial

  Wax chip

   EISA bus converter (GSC-to-EISA)

  Second RS232 serial

  Dino GSC-to-PCI bridge

  Phantom PseudoBC GSC+ port

  Visualize-EG (Graffiti) graphics

  Intel 82503 Ethernet transceiver, media auto-selection

  CS4215 or AD1849 programmable CODECs

  WD37C65C Floppy controller

  B132L, B160L: NCR 53C720 16-bit Fast-Wide high-voltage differential (HVD) SCSI-2

  B132L+, B180L+: Symbios Logic 53C875 16-bit Ultra-Wide SCSI-2 controller

  B132L+, B180L+: DEC 21142/43 (Tulip) Fast-Ethernet controller

Buses

  GSC general system-level I/O bus

  B132L (both): 33 MHz 132 MB/s

  B160L: 40 MHz 160 MB/s

  B180L+: 36 MHz 144 MB/s

  EISA additional expansion I/O bus

  PCI-32/33 high-performance device I/O bus

  SCSI-2 Fast-Narrow single-ended bus

  B132L, B160L: SCSI-2 Fast-Wide high-voltage differential main storage I/O bus

  B132L+, B180L+: SCSI-2 Ultra-Wide single-ended main storage I/O bus

Memory

  72-pin ECC SIMMs, 60ns or faster

  Takes 16-256 MB modules (latest firmware-rev needed)

  Six slots

  32 MB (2×16) minimum, 1.5 GB (6×256) maximum

Expansion

  B132L, B160L:

  One slot for either a GSC (EISA formfactor) or PCI 32-bit/33 MHz, 3.3 V card

  One slot for either a GSC (EISA formfactor), PCI 32-bit/33 MHz, 3.3 V or EISA card

  B132L+, B180L+:

  One slot for either a GSC (EISA formfactor) or PCI 32-bit/33 MHz, 5 V card

  One slot for either a GSC (EISA formfactor), PCI 32-bit/33 MHz, 5 V or EISA card

I/O slot layout (from top to bottom):

  PCI-32/33 or GSC

  PCI-32/33 or EISA or GSC

Drives

  One tray for a 68-pin half-height 3.5″ SCSI hard drive, either Fast-Wide high-voltage      differential (B132L, B160L) or Ultra-Wide SE (+-models)

  One tray for a 3.5″ Floppy drive

  One tray for a 50-pin half-heigth 5.25″ Fast-Narrow 50-pin SE SCSI drive, external accessible,   can also accomodate a hard drive.

External connectors

  50-pin HD SCSI-2 Fast-Narrow single-ended

  B132L, B160L: 68-pin HD SCSI-2 Fast-Wide high-voltage differential

  B132L+, B180L+: 68-pin HD SCSI-3 Ultra-Wide single-ended

Two DB9 male RS232C serial

  DB25 female parallel

  B132L, B160L: TP/RJ45 10 Mbit Ethernet

  B132L+, B180L+: TP/RJ45 10/100 Mbit Ethernet

15-pin AUI 10 Mbit Ethernet

  EVC graphics port1

  Two PS/2 connectors for keyboard & mouse

  Four phone jacks (microphone, headphones, line-in and line-out)