bz-300电动式液压钳充电式液压钳电动压线钳150mm2铜铝压接
bz-300电动式液压钳,压接头可以在纵轴进行350°的轻松旋转,使其可进入狭窄的角落工作
bz-300 battery crimping tool for 16-300mm2 cables
for crimping 16,25,35,50,70,95,120,150,185,240,300mm2 lugs
技术参数: | |
出力 | 60kn |
行程 | 17mm |
压接次数 | 320times没饱和电压(铜线 150mm2) |
压接一次的时间 | 3-6s(根据线缆的直径大小) |
电池电压 | 18v |
电池容量 | 3.0ah |
充电时间 | 2小时 |
包装 | plastic box |
配件 | |
模具: 16,25,35,50,70,95,120,150,185,240,300mm2 | |
电池 | 2块 |
充电池 | 1个 |
油缸密封圈 | 1套 |
安全法密封圈 | 1套 |
technical parameters: | |
crimping force | 60kn |
stroke | 17mm |
crimp/charge | 320times(cu 150mm2) |
crimping cycle | 3-6s(depend on the size of cable) |
voltage | 18v |
capacity | 3.0ah |
charging time | 2hours |
package | plastic box |
accessories | |
crimping dies: 16,25,35,50,70,95,120,150,185,240,300mm2 | |
battery | 2pcs |
charger | 1pcs |
sealing ring of cylinder | 1set |
sealing ring of safety valve | 1set |
型号: bz-300
电池压接工具16-300mm2
微型计算机控制系统--——在压接时自动检测压力,双重安全保护。
压力自动释放功能——在压力达到Zui大时,将停止工具冲压的动力并释放90%的压力
配备了一个双活塞泵,快速接触压接物后,在压接过程中自动提供更高的压力。
为了更好的进入狭窄的角落和其他困难的工作区域,压接头可在纵轴周围350°轻松旋转。
如果偏离了设定操作压力或电量过低被确认时,信号声将响起并伴随红色显示闪烁。
一键控制——按下开关按钮进行工作,松开一半的开关意味着停止压接的动力,完全松开开关意味着活塞恢复到Zui初的位置。
锂电池没有记忆效应也不自动放电,即使长时间没有运转,工具也随时可以运转。与镍氢电池相比锂电池具有更低地功率重量比,表现为多50%的电量和更短的充电周期。
当工具在超过60°的温度下长时间的工作时,一个温度传感器自动使工具停止工作并且故障信号会响起,这意味着工具无法正常工作直到温度恢复正常。
item no: bz-300
battery crimping tool 16-300mm2
micro computer control system-automatically detect the pressure when it is crimping, with double safety protect.
pressure released automatically function-the tool stop forcing the pressing and release 90% pressure when the pressure reached maximum.
the tool e with a double piston pump which characterized by a fast approach towards the connecting material and transfer to high pressure automatically by slow crimping.
the crimping head can be smoothly turned by 350° around the longitudinal axis in order to gain better access to tight corners and other difficult working areas.
if a deviation from the set operation pressure or low battery charges is identified, an acoustic signal sounds and a red display flashes.
one key control-press the trigger to start working, half loosing the trigger means stop forcing pressure, loosing fully means piston return to the original position.
li-ion batteries do neither have a memory effect nor self discharge. even after long periods of no operation, the tool is always ready to operate. in addition we see a lower power weight ratio with 50% more capacity and shorter charging cycles compare to nimh batteries.
a temperature sensor makes the tool stop working automatically when the temperature over 60℃ under long time working, the fault signal sounds, it means the tool can’t continue work until the temperature reduced to the normal.