味精脱色树脂

tulsion® a-2xmp能以较少的碱有效再生 ,具有较高的工作交换容量。比凝胶型阴离子更具能抵抗有机物的污染。tulsion® a-2xmp 以自由基型式供货 ,并能马上使用。 tulsion® a-2x mp yields exceptionally high operating capacity on caustic soda regeneration and has low rinse re it has a higher resistance to organic matter than gel type anion exchangers. tulsion® a-2x mp is supplied as spherical moist beads in the free base form , ready to use.

typical characteristics – 基本特性

型式(type)

:

marcro-porous weak basic anion exchange resin

大孔型弱碱型阴离子交换树脂

主体結構(matrix structure)

:

polystyrene copolymer , 聚苯酚共聚物

功能基(functional group)

:

tertiary amine , 4级胺

离子型式(ionic form)

:

chloride , 氯离子

均匀系数(uniformity coefficient)

:

max. 1.25

平均粒径(harmonic mean size)

0.3 – 1.2 mm.

全交换容量(total exchange capacity)

:

1.30 meq/ ml

含水份(moisture content (approx.))

:

40- 48 %

ph范围(ph range)

:

0 to 14

溶解率(solubility)

:

insoluble in all common solvents.

允许温度(maximum temp. stability)

:

60°c (140ºf)

微粒含量(fines content)

:

less than 0.5% through 50 u.s. mesh

密度(backwash settled density)

shipping weight

:

:

42 to 44 lbs/ft3 (670-710 g/l)

730 g / lit (approx.)

科海思（北京）科技有限公司 cohesion (beijing) co.,ltd

contact: mr.shuai tel:010-57812783

mob： e-mail:sui.denise@gmail.com

address: room 1006,no.1 hangfeng road,fengtai district, beijing,china. www.cohesion.cc

tulsiona-2x mp 弱碱型阴离子树脂

operation conditions – 操作条件 操作温度 (operation temp.) max c : 175°f (80°c) 树脂床高度 (resin bed depth) mm : 24” (600 mm) 采水流量 (service flow rate) maxi : 40 m3/hr/m3 逆洗流量(backwash flow rate at 25°c) : 4 to 6 m3/hr/m3 逆洗空间(backwash expansion) : 50 to 70 % 再生药剂 (regenerant) : naoh, na2co3 , nh4oh 再生药剂用量(regeneration levels) : 120 % of the operating capacity for naoh 再生药剂加药时间(regeneration minutes) : 20 – 60 mins 再生流量 (regeneration flow rate) : 5 to 10 m3/hr/m3 再生慢洗 (regeneration slow rinse) : 2 bv mini. 快洗 (fast rinse) : 采水流量service flow rage 快洗 水量 (fast rinse volume) : 4 to 6 bv

相关产品：味精脱色树脂 , 离子交换树脂 , 杜笙树脂