Dupont Elvamide 醇溶尼龙8061

 专业的热塑性工程塑料树脂的供应链服务商

东莞,深圳,elvamide,dupont,8061,8063,胶水尼龙,甲醇/酒精溶解,低熔融加工温度,高伸长率,

与热固性树脂的交联能力,结合良好的溶解性,作为溶剂易于加工,熔融系统结合内在韧性尼龙

nylon/pa multipolymer resins,elvamide 8061,8063,8066,dupont nylon resins

elvamide8061, 小方片,胶水尼龙,醇溶尼龙, 通用共聚尼龙树脂, 结合良好的溶解性,耐磨损性和韧性。非注塑级,断裂伸长率320 ﹪,溶点156摄氏度,干燥107摄氏度, 甲醛-酒精溶化,拉伸强度高 耐磨 有优异的附着力和粘结性,用途:可沾结 添加改性吹膜 涂覆,用于线品（缝纫线 牙线 钓鱼线 高山特种线）制造和工程塑料改性加工,改善gf/cf和树脂的结合,达致成本和性能的**平衡

elvamide8063, 小方片,胶水尼龙,醇溶尼龙, 共聚尼龙。与8061性能差不多，比8061有更大的凝胶性及较低的溶液粘度

elvamide树脂是热塑性聚酰胺，作为溶剂易于加工，是熔融系统结合的内在韧性尼龙。与传统的尼龙树脂不同：酒精溶解，低熔融加工温度，高伸长率，与热固性树脂的交联的能力。elvamide树脂可以单独使用，也可以作为增塑剂与其它树脂组合，以满足特定的*终使用要求。大多数用途是作为溶剂的解决方案。它们也可以是熔融复合，例如在制造颜料浓缩物或膜用于热活化的粘合剂的挤出。其相对较低的熔融加工温度允许使用热敏感颜料和尼龙树脂基材，elvamide树脂适合模塑和挤塑。比传统的尼龙 承受冲击和抗磨损性能较差，但更柔软，更灵活。elvamide共聚树脂的熔点范围从115摄氏度到160摄氏度，而均聚尼龙

 耐高温尼龙66为265摄氏度。 elvamide特点:耐磨性,耐冲击性,抗大多数油 溶剂和汽油,,颜料分散能力,高拉伸强度,天然润滑,高温和低温韧性,耐碱性,抗氧化能力。elvamide应用 纺织品：螺纹接合 救助结合 织物

粘接，粘合剂：单独或组合使用，环氧树脂，酚醛树脂或其它的热固性树脂，浓色：尼龙树脂兼容 显色性好。

1.elvamide pa mutipolymer resins 

2.alcohol solubility 

3.lower melt-processing temperatures 

4.high elongation 

grades available

elvamide 8061: general purpose combines good solubility, abrasion resistance, and toughness

elvamide 8063: greater gel resistance,lower viscosity than 8061

elvamide 8023r: low viscosity for special high solids solution

elvamide 8066: softer resin with lower melting point for textile adhesive

basic introduction

elvamide resins are thermoplastic polyamides that combine the inherent toughness of nylon with ease of processing in 

solvent as well as melt systems.

elvamide resins differ from conventional nylons in that they offer:

alcohol solubility

lower melt-processing temperatures

high elongation

ability to cross-link with thermosetting resins

 elvamide resins can be used singly or in a combi- nation and can be further modified by formulating with plasticizer or

 other resins to meet specific end-use re for most uses, they are applied from solvent solutions. they can 

also be melt compounded as, for example, in the manufacture of pigment concentrates or for extrusion into film 

adhesives for heat reactivation. their relatively low melt-processing temperature allows use with heat- sensitive

pigments and substrates.like zytel nylon resins, elvamide resins are suitable for molding and extrusion. they are tough,

 withstand impact and resist abrasion, but are softer and more flexible than conventional nylons. melting points for

 elvamide multipolymer resins range from 115 centigrade to 160 centigrade, compared with 265 centigrade for high 

temperature resistant 66 nylon homopolymer.

 features

abrasion resistance

impact resistance

resistance to most oils, solvents and gasolines

pigment dispersing ability

melting point

high tensile strength

natural lubricity

toughness at high and low temperatures

alkali resistance

antioxidant ability

application

textiles: thread bonding, salvage bonding, fabric bonding

adhesives: alone or in combination with epoxy, phenolic or other thermosetting resins.

coatings: relatively clear and non-tacky, and provide abrasion resis- tance and durability

color concentrate: compatible with nylon resins